Productinformatie:

Start booster / capacitor booster / starting aid / jump starter

This professional Fluxon 12V battery-free starter booster with capacitor is very suitable for starting cars, motorcycles, tractors and small boats. The booster is equipped with so-called ultracapacitors, also called capacitors. This system requires no maintenance and charges from the residual voltage of the vehicle's battery. The big advantage of this type of starter booster is that it does not contain a battery, charging can be done by connecting the booster to the battery terminals of a running vehicle. It is therefore advisable to charge the booster on the vehicle battery after each use, so that the booster is immediately ready for the next job. The charging time is then on average 8 to 40 seconds, depending on the type of vehicle. Charging at mains voltage is also possible, the charging time varies per model and is on average 3 to 8 hours. The booster always remains operational. Even after years of storage, it is ready to start after a short charging cycle.

The powerful starter booster is very resistant and therefore suitable for all final professional interventions and repairs. The booster does not lose power at extreme temperatures, the booster is protected against short circuits and reverse polarity, the booster is protected against peak points and the vehicle's electronics are protected. The weight has been reduced to the maximum and therefore the booster can also be used as a portable energy source. Furthermore, the booster starts both petrol and diesel engines and the device checks the capacity of the vehicle's alternator.

Each capacitor starter booster is equipped as standard with a self-regulating charger (230V), durable, heavy-duty insulated battery terminals of high quality and ABS shock-resistant housing. The battery terminals are equipped with an extra switch, with which the power can be disconnected from the terminals at any time. This provides extra safety.

Specifications:

• voltage = 12V
• starting current = 1400A
• peak current = 6000A
• output voltage = 12V / 1.5A
• excitation current no-load = 50mA max
• excitation current on load = 90mA max
• output voltage no-load DC = 14.9V
• cable length = 900mm
• cable cross-section = 25mm²