CUT40C Plasma cutter with 6 meter S45 torch auto pilot.(vp)
€349,00
incl. BTW
€288,43
excl. BTW
Sold out
SKU
Cut40CVP
Shipping calculated at checkout.
Productinformatie:
CUT40C Plasma cutter with 6 meter S45 torch auto pilot.(vp)
The portable plasma cutting machine for light and medium-heavy cutting work with compressed air.
The CUT40 is a plasma cutting machine for manually cutting unalloyed and low alloyed steel, stainless steel, as well as copper and aluminum up to a thickness of up to 10 mm.
For efficient cutting of the above-mentioned metals, where an acceptable cutting speed can still be observed, the maximum cutting capacity is approximately 8-10 mm.
The machine is supplied with a Trafimet S45 torch, air reduction valve and a ground cable.
We had a 6 meter torch mounted on this machine. This works well, but you have to start the machine twice in a row, i.e. on-off.
You can do this twice in succession with the plasma pistol and it is a simple trick.
Please note that the color of the machine is blue and the model may differ from the photos
|
Item Name |
CUT40C moss |
|
Article number |
WP040W05 |
|
Voltage |
230V ±15% |
|
Frequency |
50/60Hz |
|
Power Factor |
0.73 |
|
Housing Protection Class |
IP21S |
|
Duty cycle |
60% |
|
Efficiency |
80% |
|
Weight |
9kg |
|
Dimensions |
371X153X232mm |
|
Power Input current |
16A |
|
Nominal Power |
5KVA |
|
No-load voltage |
230V |
|
Output current |
20-40A |
|
Nominal Output Voltage |
96V |
|
Inner diameter of Burner |
1mm |
|
Air pressure |
4.5 bar |
|
Maximum Thickness |
1-10mm |
|
Arc Flash Start |
HF |
|
Arching |
Untouched |
|
Inclusive:
|
